Environmental waste due to plastic pollution is one of the greatest challenges of our time. Sustainable alternatives to petroleum-based packaging have long been sought. An innovative solution is the versatile barrier papers that are recyclable and ideally biodegradable. The coating process for these papers is demanding; in addition to the perfect application of one or more functional layers, the drying of the sometimes temperature-sensitive application media is a challenge.
Voith officially unveils the world’s most modern pilot coater at an online grand opening event. Voith has extensively rebuilt its pilot coater at its Technology Center in Heidenheim, elevating it to the latest state of the art to meet the worldwide increase in customer interest in trials with barrier papers and flexible packaging solutions. For ideal results, the new pilot coater features expanded drying capacities, optimized web guiding and the latest automation technology and sensor systems.
«With the modernized pilot coater, Voith enables its customers to conduct extremely flexible pilot tests with different coating variants for all grades of specialty papers, packaging papers, board and graphic papers – and with highly efficient drying» says Frank Opletal, CTO Voith Paper. «Customers can apply the knowledge gained directly to practical applications. By producing small batches for market tests or comparing different system concepts, our customers get a much higher planning reliability for possible future projects».
Highly efficient drying
Another important factor in the production of barrier paper, and also many other types of coated paper, is careful and precise drying. Over-drying carries the risk of bubbles forming in the coating layer, which can destroy the barrier properties. Under-drying, on the other hand, can also cause defects, especially if the coating layer has not yet completely dried when the paper passes through subsequent guide rolls. Therefore, Voith paid special attention to the drying technology when rebuilding the test coater. «As part of the upgrade, we succeeded in implementing non-contact drying in the existing hall over a web length of more than 40 meters» explains Uwe Fröhlich, senior manager R&D Pilot Operation at Voith. Eight dryers, the last of which can also be used as a cooler, ensure that the coating is dried reliably. The infrared dryers used are equipped with the latest generation of infrared emitters – the HelioX emitters – which are characterized by high efficiency with comparatively low emissions. The compact design of the air dryer units enables stable drying conditions to be quickly set during trials. What makes the pilot coater unique is that the dryer hoods at the top and bottom can be heated separately depending on the requirements. Around 200 sensors for measuring drying-specific parameters and innovative automation technology enable a wide range of analysis and process control options.